High Flow Filter Cartridge for 3M Cuno Replacement

Utter’s MHF Series high flow pleated filter cartridges are made from depth fine PP or GF non-woven fabrics. The filter has a big diameter of 6inch. There is a core inside which suitable for the outside to inside flow pattern. The big diameter design makes the filter big filtration area.

Utter’s MFH Series high flow filter is the perfect replacement option for 3M Cuno 7000 and 740B elements. It has long service life and high flow rate result in low investment and less labor cost in many applications.



  • Large water flow capacity in one filter element, up to 113 m³/h
  • High dirt loading capacity for long service life and superior retention efficiency
  • Require fewer change out and less maintenance
  • Broad chemical compatibility is ideal for chemical applications requiring high purity
  • Convenient handle for easy manual and installation. No loose parts to assemble thus less labor costs
  • Free of binders, additives and lubricants


Pre RO/DI, cooling water, chemicals, petrochemical, electronics, food & beverage

Filter Media Polypropylene
Micro Rating 1, 3, 5, 10, 20, 30, 40, 70μm
O-ring Silicone, EPDM, Viton, Teflon
Core Polypropylene
Filter Support Polypropylene
End Cap Polypropylene
Cage Polypropylene
Outer Diameter 6″ (152mm)
Length 40” & 60“
Max.Operating Temp. 70℃(160℉)
Max.Differential Pressure 3.4bar(50psi) at 20℃(68℉)
Recommended Change Out Differential Pressure 2.4bar(35psi)
Type Micron Rating Filter Media Nominal Length O-ring Option
MHF 1 – 1μm
3 – 3μm
5- 5μm
10 -10μm
20 -20μm
30 -30μm
40 -40μm
70 -70μm
G – Polypropylene

S – Glass Fiber

20 – 20″

40 – 40″
60 – 60″

S – Silicone
V – Viton