Utter Bag type high flow filter cartridges are made of pleated polypropylene depth media and designed in inside-out flow direction which is correspondent with bag filter. The cartridges satisfy processes requiring high purity and possess high flow rate and long service life. Innovative push-in flanges enable quick and convenient replacement into most commercial bag filter housings. With advantages of big flowrate and high purity, fewer change outs and lower maintenance cost are required.
Feature
- Convertible into most commercial bag filter housings, providing cost-saving options without hardware change
- High surface area design provides high flow capacity and longer service life
- Innovative push-in flanges enable quick and convenient change outs
- Inside-out flow effectively traps contaminants inside the elements
- Manufactured by advanced thermal welding techniques, cartridges are free of binders and additives
Application
Pre RO/DI, cooling water, chemicals, petrochemical, electronics, food & beverages
| Filter Media | Polypropylene/Glass Fiber |
| Micro Rating | 1, 3, 5, 10, 20, 40μm |
| O-ring | EPDM, Viton, Teflon |
| Core | Polypropylene |
| Filter Support | Polypropylene |
| End Cap | Polypropylene |
| Cage | Polypropylene |
| Outer Diameter | 6″ (152mm) |
| Length | #1 & #2 size |
| Max.Operating Temp. | 70℃(160℉) |
| Max.Differential Pressure | 3.4bar(50psi) at 20℃(68℉) |
| Recommended Change Out Differential Pressure | 2.4bar(35psi) |
| Type | Micron Rating | Filter Media | Nominal Length | O-ring Option |
| UBG | 1 – 1μm 3 – 3μm 5- 5μm 10 -10μm 20 -20μm 30 -30μm 40 -40μm 70 -70μm |
P – Polypropylene GF – Glass Fiber |
1 – size 1 bag 2 – size 2 bag |
E – EPDM V – Viton |